Most homeowners know their heating and cooling bills feel too high, but few know exactly why. A home energy audit answers that question by showing where air escapes, where insulation falls short, and which upgrades will save the most money. The audit isn’t complicated, and a little preparation helps you get far more from it. Here’s what an audit includes, how to prepare, and how to turn the results into a plan.

What a Home Energy Audit Includes

During an audit, a trained professional walks through the house and evaluates insulation levels in the attic, walls, and crawl space, along with windows, doors, heating and cooling equipment, the water heater, ductwork, and lighting. Many audits include a blower door test, which depressurizes the house to measure air leakage and locate drafts. An infrared camera can reveal missing insulation, air leaks, and moisture patterns that aren’t visible, and duct testing measures how much conditioned air escapes before it reaches the rooms. A good audit also includes a combustion safety check, which looks at venting and carbon monoxide risks and is just as important as saving energy. You receive a report with prioritized recommendations rather than a vague list of ideas.

Prepare Before the Auditor Arrives

A home energy audit works best on a cold or hot day, when the temperature difference between inside and outside makes problems easier to see. Gather twelve months of utility bills so the auditor can compare your usage to similar homes. Make a list of problem areas, such as rooms that are always cold, upstairs bedrooms that overheat, or windows that feel drafty. Note the age of your furnace, air conditioner, and water heater. Clear access to the attic hatch, basement, and mechanical equipment, and plan to be home to walk through the findings and ask questions. If you’ve had recent projects such as new windows or added insulation, share the paperwork so the auditor knows what’s already been done.

Try a Mini Home Energy Audit Yourself

You can do a quick check before the professional arrives. On a windy day, hold a candle or incense stick near window frames, door edges, and outlets on exterior walls, and watch for movement. Look at the weatherstripping around doors and check the attic hatch for gaps. Peek into the attic and see how deep the insulation is, then compare it with recommendations for your climate zone. Check the fireplace damper and dryer vent flap too, since both are common sources of drafts. Look at visible ductwork for loose joints, make sure your thermostat is set properly, and check that the water heater is not set higher than needed. Swapping remaining bulbs for LEDs is an easy first step. Write down what you find and bring your notes to the audit, since your observations can point the auditor to trouble spots faster.

Turn Audit Results Into a Plan

A home energy audit is only valuable if you act on it. Start with air sealing and insulation, which usually deliver the best return, then address duct leaks, and save equipment replacement and new windows for later unless something is failing. Get quotes from licensed contractors, and ask about state, utility, and federal incentive programs, since eligibility changes and can reduce costs. After the work is done, ask the auditor to retest so you can confirm that the improvements actually worked. Compare quotes carefully, and ask contractors how they’ll verify performance, such as a post-work blower door test. Keep the scope realistic by tackling one or two projects per season, so costs stay manageable, and you can see what each improvement does to your bills. Keep the report with your home records, since it documents your home’s performance and may interest future buyers.

Frequently Asked Questions (FAQs)

How long does a home energy audit take?
Usually two to four hours, depending on the size of the home and the tests included. Larger homes or homes with complicated systems may take longer.

How much can I save?
It varies. Air sealing, insulation, and duct improvements often reduce heating and cooling costs meaningfully.

What is a blower door test?
It uses a calibrated fan mounted in a doorway to pull air out of the house, which exposes leaks and measures how tight the home is.

Do newer homes need an audit?
Yes. New homes can still have air leaks, insulation gaps, and duct problems, and an audit confirms that the home performs as intended.

What’s the best time of year for an audit?
Winter or summer, when a larger temperature difference between indoors and outdoors makes problems easier to detect with thermal imaging.

Certinspectors offers professional energy testing in the Hudson Valley area of New York. Contact us to schedule an appointment for our services.